JUMO 902020/10 Скачать руководство пользователя страница 5

Страница: 5 / 48

1 Basic information

Basic information

1.1

Safety information

1.1.1

Warning symbols

DANGER!

This symbol indicates that

personal injury from electrocution

may occur if the appropriate precaution-

ary measures are not taken.

WARNING!

This symbol in connection with the signal word indicates that

personal injury

may occur if the respective

precautionary measures are not carried out.

CAUTION!

This symbol in connection with the signal word indicates that

material damage or data loss

will occur

if the respective precautionary measures are not taken.

1.1.2

Note symbols

NOTE!

This symbol refers to

important information

about the product, its handling, or additional benefits.

READ THE DOCUMENTATION!

This symbol, which is attached to the device, indicates that the associated

documentation for the de-

vice

must be

observed

. This is necessary to identify the nature of the potential hazard, and to take

measures to prevent it.

REFERENCE!

This symbol refers to

additional information

in other sections, chapters, or other manuals.

DISPOSAL!

At the end of its service life, this device and any batteries present do not belong in the trash! Dispose of
batteries properly and in an

environmentally friendly manner

Содержание 902020/10

















































Результаты поиска

Содержание 902020/10

Отзывы:

Похожие инструкции для 902020/10

Бренды по названию

Популярные бренды

JUMO 902020/10, Руководство по эксплуатации

Результаты поиска

Содержание 902020/10

Отзывы:

Похожие инструкции для 902020/10

Бренды по названию

Популярные бренды