35
8 Handling
8.2.7
Electrical connection
The terminal assignment must be implemented according to the connection diagram. If there is no con-
nection diagram for a thermometer (such as those with a connection line), the table in
chapter 9.1 "Connection types", Page 39 shows the relevant terminal assignment.
Customer-specific terminal assignments may differ from the JUMO standards.
NOTICE!
Incorrect measurement results!
Incorrect polarity will cause major measurement deviations.
Ensure that the polarity (+/-) is correct for thermocouples.
NOTE!
When establishing the electrical connection for RTD temperature probes, bear in mind the correction of
the line resistances; see chapter 5.1.1 "Correcting line resistances", Page 22.
NOTICE!
Damage to property due to overvoltage!
Incorrectly connecting the shielding will result in potential entrainments.
Ensure a sufficient distance is maintained between power and supply lines and cables.
Observe the relevant EMC requirements when using signal and data cables and data lines. Take into
account the manufacturers' operating manual.
