Language Settings:
The scanner can be set to display all words in seven different languages.
To change the language, access the main menu by pressing the SCAN/
MENU twice. Once in the main menu, use the right/left arrow to find
the language option. When the language icon appears in the center of
the screen press OK. Once in the language setting use the right/left
arrow to highlight and select the desired language. Press OK to confirm
and apply your setting.
EXPORTING IMAGES
Transferring Stored Images:
At any time you can transfer your stored images to your PC or Mac. If
your images are stored on a SD card simply remove the card and insert
it into your computer. If you would like to transfer the images that are
stored on the internal memory via a USB cable, follow the few
steps below.
Begin by connecting your scanner via the included USB cable from your
scanner to your PC or Mac. Connect the small end of the USB cable to
the USB port on the back of the scanner , and the other end of the cable
to a USB port on your PC or Mac. Be sure that both ends of the cable
are connected well into both the scanner and the computer. You will then
need to put your scanner into USB MSDC mode. To do so, access the
main menu by pressing the SCAN/MENU twice. Once in the main menu,
use the right/left arrow to find the USB icon. When the USB icon
10
