JUMAR REG-03TFT, Инструкция по установке и обслуживанию

Страница: 7 / 35

JUMAR REG-03TFT
THE IMPLEMENTATION
REG – 03TFT controller is a modern microprocessor device controlling the work of
the pellet's burner. Implementation of advanced driver's algorithm and the flame sensor
ensures the simplicity of maintenance and the full automatization of the burning
process. The usage of a graphic display with touch screen assures an easy and clear
interaction between the use and the device. The driver is adapted also to working with
the central heatings pump and warm usage water pump (optional). Thanks to these
functions, the device can be used in expanded installations of the central heating
without using additional steering devices. The regulator is also equipped with an output
of room thermostat which enables the change of the furnace's working parameter after
reaching a particular temperature in the room. To controller added timer functions – now
user can set heating time.
THE PRICIPLE OF WORKING
The device's work is based on providing fuel via steering the feeder appropriately
and the work of a fan which steers the burning process. After reaching a particular
temperature of the heating water, the driver goes into the mode of sustaining the
temperature or switches the burner completely off. The ignition of fuel starts
automatically with the help of igniter which is connected to this driver. The driver
enables the control of the furnace's work thanks to the room thermostat. It is possible
to steer the heating in relation to the actual temperature in the room. The regulator is
also equipped with the self-control systems (detecting the malfunction of the
temperature's sensors) and mechanisms monitoring the furnace's work preventing from
going beyond the range of safety for the installation of the central heating (STB).
- 7 -