background image

2. 

Operator responsibility – Safety instructions 

The products of JULABO ensure safe operation when installed, operated, and maintained 

according to common safety regulations. This section explains the potential dangers that may 

arise when operating the refrigerators for chemicals and also specifies the most important 

safety precautions to preclude these dangers as far as possible. 
 
The operator is responsible for the qualification of the personnel operating the units.  
The personnel operating the units should be regularly instructed about the dangers involved 

with their job activities as well as measures to avert these dangers. 
Make sure all persons tasked with operating, installing, and maintaining the unit have read 

and understand the safety information and operating instructions. 
When using hazardous materials or materials that could become hazardous, the refrigerators 

for chemicals may be operated only by persons who are absolutely familiar with these 

materials and the circulator. These persons must be fully aware of possible risks. 
 
If you have any questions concerning the operation of your unit or the information in this 

manual, please contact us! 
Contact 

JULABO GmbH 

Eisenbahnstraße 45 

77960 Seelbach / Germany 

Tel.  +49 (0) 7823 / 51-0 

Fax  +49 (0) 7823 / 24 91 

[email protected]

 

www.julabo.com

 

 

Safety instructions for the operator: 

Avoid strikes to the housing, vibrations, damage to the operating-element panel (buttons, 

display), and contamination. 
Make sure the product is checked for proper condition regularly (depending on the conditions 

of use). Regularly check (at least every 2 years) the proper condition of the mandatory, 

warning, prohibition and safety labels. 
Make sure that the mains power supply has low impedance to avoid any negative effects on 

the instruments being operated on the same mains. 
Permissible ambient temperature: max. 35 °C, min. 5 °C. 
Permissible relative humidity: 50% (40 °C). 
Do not store the unit in an aggressive atmosphere. Protect the unit from contamination. 
Do not expose the unit to sunlight. 

 

 

 

Содержание KRC 180




















Отзывы: