Julabo KRC 180, Руководство по эксплуатации

Страница: 11 / 19

11
Press the selector button (2), and set the adjustment screw (5) to achieve
the desired selected temperature value on the display (6).
6. CHANGING THE DOOR OPENING SIDE
KRC50
Notice :
Installation, maintenance and repairs on the refrigerator may only be carried out
by qualified personnel.
Before carrying out the procedures mentionned below, disconnect
the refrigerator from the mains socket!
Notice :
Installation, maintenance and repairs on the refrigerator may only be carried out
by qualified personnel.
Before carrying out the procedures mentionned below, disconnect
the refrigerator from the mains socket!
The refrigerators are delivered from the factory with the door hinges on the right.
1) Remove hinge bracket with the door closed.
2) Unscrew hinge pin.
3) Remove the door downwards.
4) Unscrew hinge pin from bracket.and screw it into the adjacent mounting hole.
5) Screw it into the opposite side of the overhang.
6) Pry out cover piece from the lower left side, and insert to cover the exposed mounting
holes at the right side.
7) Pry out cover piece from thedoor handle on the right side of the door.
8) Remove the door handle, and install on the opposite side of the door in the mounting
holes provided.
9) Pull out plugs from the right side of the door, and insert into the exposed mounting
holes at the left side.
10) Hang the door into hinge pin, and close the door.
11) Screw hinge bracket to the left side of the unit, not forgetting the washers.
12) If the door is not in line with the unit housing, readjust its position in the slots of hinge
bracket, and tighten all screws firmly.