Beginning initial circulator operation
21
Beginning initial
circulator
operation
Caution!
Compare the available power voltage and fre-
quency with the specifications on the type label.
This device may be attached only to power out-
lets with an earthing contact!
The mains plug serves as a protective separator
and must be easily accessible at all times.
Do not touch the power plug or power cable
with wet hands!
Never operate a damaged or leaking unit!
Do not attempt to use the unit if the power cable
is damaged!
Attach the unit and switch it on (power switch locat-
ed on rear of unit).
The unit will perform a short self-test (versions of the
unit and software will be displayed). It then goes into
standby mode the first time the unit is turned on. This
is indicated on the display by
OFF
.