Safety notes for the user
18
4.3.
Safety instructions
Follow the safety instructions to avoid personal injury and property damage. Also,
the valid safety instructions for workplaces must be followed.
•
Only connect the unit to a power socket with an earthing contact (PE –
protective earth)!
•
The power supply plug serves as a safe disconnecting device from the
line and must always be easily accessible.
•
Place the unit on an even surface on a base made of nonflammable
material.
•
Do not stay in the area below the unit.
•
Make sure you read and understand all instructions and safety
precautions listed in this manual before installing or operating your unit.
•
Do not touch the immersion probe if it is frosted.
•
Do not bend the tube connection of the immersion probe
•
Keep the air intake and exhaust grids free of obstructions. (Maintain a
sufficient distance from all surrounding surfaces!)
•
Do not move the unit from the position where it was set up during
operation.
•
Always turn off the unit and disconnect the mains cable from the power
source before performing any service or maintenance procedures, or
before moving the unit.
•
Always turn off the unit and disconnect the mains cable from the power
source before cleaning the unit.
•
Transport the unit with care.
•
Sudden jolts or drops may cause damage in the interior of the unit.
•
Observe all warning labels.
•
Never remove warning labels.
•
Never operate units with damaged mains power cables.
•
Repairs are to be carried out only by qualified service personnel.
•
There are thermal dangers: Touchable parts of the probe can be very
cold. Therefore, exercise particular caution when touching these parts.
Use gloves.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
