EN
11
replace it with a new one.
• Do not modify the helmet or remove any
of the original parts, unless this is
specifically recommended by the
manufacturer.
• The helmet must not be adapted, or fitted
with accessories not recommended by the
manufacturer.
• Solvents, paint and/or stickers can damage
the helmet and prevent it from providing
proper protection during an accident.
• Exercise due care and attention during all
activities that involve using the helmet, and
read the instructions carefully before use.
TYPE APPROVAL
This product complies with the requirements in
EN 1080:2013 and PPE 2016/425.
EU Type examination conducted by: SGS United
Kingdom Ltd, Weston-super-Mare, BS22 6WA,
UK. Notified Body No: 0120
SYMBOLS
Approved as per applicable
directives.
DESCRIPTION
PROTECTION AND VENTILATION
The outer shell makes the helmet very
lightweight, durable and robust. The
ventilation openings and inner air channels
allow air to flow over the forehead and under
the helmet for maximum cooling.
A. Back
B. Front
3. Strap 2
4. Strap 1
5. Back strap
SAFETY INSTRUCTIONS
WARNING!
The helmet has a quick-release clasp,
designed to unfasten in situations where
there is a risk of suffocation. The helmet can
therefore come loose after severe falls or
collisions.
• The helmet is intended to be worn by
small children for activities where there is
a risk of head injuries in combination with
the risk of suffocation.
• Although the clasp on the helmet is
designed to unfasten when exposed to
pressure, it is recommended to take off
the helmet before climbing.
• that the helmet is intended for use by
young children while pursuing activities in
environments which have proven risks of
head injuries in combination with risks of
strangulation.
• The helmet is not intended and does not
provide adequate protection for motor
sports, riding a moped, or other vehicles.
• To provide full protection the helmet must
be properly fitted and the straps and
clasps must be correctly tensioned and
fastened.
• No helmet can provide full protection
from head injuries. Accidents at low speed
can also lead to serious or fatal head
injuries, depending on the force of
impact.
• The helmet is designed to absorb the
force of impact, either by deformation
and/or destruction. Even if there is no
visible damage after a fall the helmet
should be immediately discarded and
replaced with a new one.
• Do not expose the helmet to heat. The
helmet will be damaged if it is exposed to
temperatures over 65 °C. This
temperature can be exceeded in dark
vehicles and storage cases during very hot
weather. Heat deforms helmets and
blisters the surface structure. Discard a
damaged helmet immediately and
Содержание KAYOBA 004426
Страница 4: ...1 2 3 3 2 1 5 4 B A 1 A 2 3...
