Jula 723-076, Руководство по эксплуатации

Страница: 23 / 28

ENGLISH
23
Extra safety instructions
WARNING! Only use the fuel recommended in this manual. Carefully follow the instructions in the section
Fuel and Lubrication in the manual.

The petrol must always be correctly mixed with 2-stroke engine oil. Otherwise the engine can
become permanently damaged and the manufacturer's warranty will no longer be valid.

Do not use any other cutting tools as accessories. Always use original spare parts and
accessories. These are specially designed to ensure the best performance and maximum safety
when using our products. Otherwise there is a risk of inferior performance and, at worst, personal
injury. Always use the trimmer head supplied with the product. Do not use any other cutting tools
as accessories. The use of other accessories can void the manufacturer's warranty and can lead to
serious personal injury.
TECHNICAL DATA
Motor type Air-cooled, 2-stroke engine
Displacement 25.4 cc
Max. speed 7500 rpm
Trimming diameter 380 mm
Fuel volume 0.6 l
Guaranteed sound power level, LwA 110 dB(A)
Sound pressure level, LpA 98 dB(A), K= 3 dB
Max. vibration level 7.5 m/s2, K = 1.5 m/s2
Always wear ear protection!
The declared vibration value, which has been measured by a standardised test method, can be used to
compare different tools with each other and for a preliminary assessment of exposure.
WARNING! The actual vibration level when using power tools may differ from the specified maximum
value, depending on how the tool is used. It is therefore necessary to determine which safety precautions
are required to protect the user, based on an estimate of exposure in actual operating conditions (taking
into account all stages of the work cycle, e.g. the time when the tool is switched off and when it is idling,
in addition to the start-up time).
DESCRIPTION
1. Drive shaft unit
2. Catch
3. Throttle control lever
4. Ignition lock
5. Safety switch
6. Handlebar
7. Harness attachment
8. Air filter cover
9. Filler cap
10. Fuel tank
11. Primer
12. Choke
13. Safety guard
14. Trimmer head
ASSEMBLY
Fitting the handlebar
Place the handlebar on the drive shaft unit. Tighten the retaining screws.