EN
42
MAINTENANCE
WARNING:
Switch off the engine, release the spark plug lead from the spark plug, and wait until all
moving parts have completely stopped before refuelling, cleaning, maintenance and/or repairs.
• Check the oil level at regular intervals and top up or change the oil when necessary.
• Remove grass from underneath the deck at regular intervals.
• Lubricate the wheel axles and bearings at regular intervals with grease.
• Check that the blades are sharp and correctly balanced at regular intervals.
• Check that all screw connections are properly tightened at regular intervals. Damaged or
defective screw connections can cause serious personal injury and/or material damage.
• If you run against a hard object, stop and check that the blades are not blocked or damaged.
Repairs should be carried out by qualified personnel or an authorised service centre.
Grass catcher
Empty and clean the catcher and store it in a dry, well-ventilated area.
Blade maintenance
1.
The blades should be sharpened at intervals of about 25 working hours.
2.
Remove the blades by undoing the retaining screws. Check the blade bracket and replace any
worn or damaged parts.
3.
Make sure to fit the blades with the edges pointing forwards in the direction of rotation of the
engine. Tighten the screws holding the blades to 37 Nm. Use a torque wrench.
NOTE:
• Only use original spare parts. The use of other parts can result in serious personal injury and/or
material damage.
• Only use correctly balanced blades.
• Only use blades recommended by the manufacturer.
Cleaning
IMPORTANT:
Do not spray water on the engine – risk of fuel contamination or water penetrating and
damaging the engine.
1.
Wipe the lawn mower with a dry cloth.
2.
Connect a water hose to the quick-release coupling on the casing and flush the underside of
