SVENSKA
2
ENGLI SH
SAFETY INSTRUCTIONS
Read the Operating Instructions carefully before use!
Check that the power supply is disconnected before installation and servicing.
When the lamp is switched on, the temperature in the bulb gradually increases. Do not touch the bulb
when it is on or has been switched off but not cooled sufficiently.
When the bulb needs to be replaced, turn off the lamp and wait until it has cooled sufficiently.
The bulb output must never exceed the stated output.
If the glass in the lamp shade is damaged, it must be replaced as soon as possible. Do not use the
lamp if the shade is not intact.
Do not look directly into a bulb when the lamp is switched on.
Make sure the lamp is properly earthed.
ELECTRICAL SAFETY
New installations and extensions to existing systems must always be performed by a qualified
electrician. If you have the necessary experience and knowledge, you may replace switches and wall
sockets, fit plugs, extension cords and lamp holders. If not, you should contact an electrician.
Improper installation may result in electric shock or fire.
TECHNICAL DATA
Rated voltage
2
20 - 2
30 V ~ 50 Hz
Output power
100
W
Protection rating
IP4
4
Safety class
I
Base
E27
Dimensions
109 x 28 x 8.5 cm