manualshive.com logo in svg

JUKI SC-920, Руководство инженера

Поделиться
Скачать
JUKI SC-920 Скачать руководство пользователя страница 75

– 68 –

®

INDUSTRIAL SEWING MACHINE DIVISION

2-11-1, TSURUMAKI, TAMA-SHI,
TOKYO 206-8551, JAPAN

http://www.juki.com

PHONE :

 (81)42-357-2371

FAX       :

 (81)42-357-2274

Copyright © 2010 JUKI CORPORATION.

All rights reserved throughout the world.

Please do not hesitate to contact our distributors or agents in your area for further information when necessary.

* The description covered in this engineer's manual is subject to change for improvement of the

commodity without notice.

10 · 01 Printed in Japan (A)

This manual uses environment-friendly soyink.

Juki Corporation operates an environmental management system to
promote and conduct the following as the company engages in the
research, development, design, sales, distribution,and maintenance
of industrial sewing machines, household sewing machines, industrial
robots, etc., and in the provision of sales and maintenance services
for data entry systems:

The development of products and engineering processes that are
safe to the environment

Green procurement and green purchasing

Energy conservation (reduction in carbon-dioxide emissions)

Resource saving (reduction of papers purchased, etc.)

Reduction and recycling of waste

Improvement of logistics efficiency (modal shift and improvement
of packaging, packing, etc.)

CM001

ISO14001 : 2004

REG.NO.JSAE389

089

Содержание SC-920












































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды