JUKI MS-1190, Инструкция по эксплуатации

Страница: 12 / 96

– 1 –
Noise
- Equivalent continuous emission sound pressure level (L
pA
) at the workstation:
A-weighted value of 82.5 dB; (Includes K
pA
= 2.5 dB); according to ISO 10821- C.6.2 -ISO 11204
GR2 at 4,000 sti/min.
- Sound power level (L
WA
);
A-weighted value of 90.5 dB; (Includes K
WA
= 2.5 dB); according to ISO 10821- C.6.2 -ISO 11204
GR2 at 4,000 sti/min.
1) When carrying the sewing machine, be sure to carry
by two people.
(Caution) Do not hold the pulley.
2) Do not place a protruding object, such as a screw
driver, at a place where the sewing machine is to be
installed.
3) Attach belt dodging base
1
to the sewing machine
with hexagon head bolt
2
.
4) Put the sewing machine on the table and determine its
position (belt groove and through hole
3
for passing
the presser bar lifter chain).
5) Attach two machine head support plates
4
to the
sewing machine by means of screw
5
. Fix the plates
on the table by means of hexagonal bolt
6
, washer
7
,
spring washer
8
and nut
9
.
6) Place a level on bed side plate
!0
in a lateral direction
and a longitudinal direction to check that the sewing
machine is properly placed in a horizontal position.
7) Install belt cover
!1
, V belt, belt cover lid
!2
, and top
cover
!3
on the sewing machine and fix them with
screws
!4
and
!5
.
When installing the belt over, temporarily tighten the
screw fi rst. Then, securely tighten the screw after the
installation of all related parts.
!3
!2
1
!5
4
9
6
7
8
2
!1
!4
!0
3
5
4
6
Model
JUKI New Defrix Oil No.1
1. SETTING UP THE SEWING MACHINE