JUKI MF-7800D Series, Руководство инженера

Страница: 157 / 165

– 153 –
5-9) Double bonding stitch 9-A) Throat plate A-1) R of stitch tongue in throat plate Replace it with the genuine part.
(Middle, Left) is too large. Stitch tongue is too
short.
9-B) Needle B-1) Worn out needle point, needle Replace needle with new one,
bend, wrong needle Use UY128GAS.
9-C) Looper C-1) Flaw in looper’s ventral section, Replace the looper when modified or its shape
incorrect polishing is changed too much.
9-D) Needle height D-1) Needle bar position is too low. Refer to the standard adjustment figures.
9-E) Threading E-1) Incorrect threading Refer to threading diagram.
9-F) Needle thread tension F-1) Tension is too weak Increase tension.
9-G) Needle thread guide rod G-1) Substandard lower positioning of Adjust the thread guide position upward.
thread guide
9-H) Auxiliary thread tension H-1) Use nipper is likely to generate Do not use nipper.
adjustment this trouble.
From the previous page
To the next page
Trouble (1) Trouble (2) Cause (1) Cause (2) Corrective measures
Right needle enters
middle needle loop.
Length of stitch tongue
R
Middle needle enters
left needle loop.