JUKI MF-7500 Series, Инструкция по эксплуатации

Страница: 25 / 31

– 23 – – 23 – ‒ 23 ‒
Timing of the feed driving eccentric cam can be retarded
from the standard adjustment by 10°.
1) Remove cloth plate, left
❶
and rubber plugs
❷
.
2) Insert a hexagonal wrench key into the hole from which
the rubber plug is removed to loosen two setscrews
❺
and ❻ of positioning cam ❸ and setscrews ❼ and ❽
of feed driving eccentric cam
❹
.
4) Fix positioning cam
❸
on flat section
C
with positioning
cam setscrew No. 2 ❻ , while lightly pressing the cam
to the right.
5) Check to be sure that feed driving eccentric cam ❹ is
movable. Then, tighten setscrew No. 1
❺
.
6) Fix feed driving eccentric cam ❹ with eccentric cam
setscrews No. 1
❼
and No. 2
❽
, while pressing the
cam in the opposite direction to its normal movement.
Check to be sure that the "positioning cam
❸
is in contact with the feed driving eccen-
tric cam"
❹
(section D) so as to prevent
the setscrews from loosening.
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the follow-
ing work after turning the power off and ascertaining that the motor is at rest.
❹
❻
Lightly pressed to
the right
D
❼
❺
❻
❼
❽
❸
❽
C
❸
❸
❶
❷
(1) Changing the feed driving movement
3) Move positioning cam
❸
to the left. Disengage the
convex section from the 1st concave section. Then,
engage the convex section
A
with the 2nd concave
section B .
17. Adjusting the feed locus
❸
A
B