Preparing the machine
Thread guide
Raise the support rod fully, turning slightly until the positioning
catches engage (A). Position the thread guide on the thread
stand so that the arrow is to the front (B).
Attaching the spool holders
Attach the separately packed spool holder (equipped with two
spool holders pins) to the fixed spool holder, by pushing until it
snaps in place.
A
B
Thread / cones / spools
The anti-vibration cone should
be used with the wider edge at
the bottom on the spool holder
pin when sewing with cones.
Large spools
If large industrial spools are used,
position the anti-vibration cone up-
side down on the spool holder pin,
i.e. with the wider edge at the top.
Household spools
Remove the anti-vibration
cones. Place spools on spool
holder pins and push the spool
caps on with the rounded side
downwards.
Thread nets
If the threads slip and gets twist-
ed, cover the spools of upper and
lower looper with the nets supplied
in the accessory bag.
7
