JUKI LK-1900AN-FS, Брошюра и характеристики

Страница: 3 / 12

øA øB
A
B
A
B
A
B
SM8040302TP
L
A
B
SM8040302TP
L
7
7
24
22
14 14
36
LK1900AN S000
■
TABLE OF THE OPTIONAL PARTS
■
WHEN YOU PLACE ORDERS
●
Bartacking
●
Eyelet buttonhole bartacking
●
Belt-loop attaching
MC598
[Machine head] [Control box]
The LK-1900AN model comes in five different type models, such as S type (standard), H type (for heavy-weight
materials), F type (for foundation), M type (for knits and knitted materials) and W type (with a large shuttle hook
for heavy-weight materials), to offer a choice according to any application.
The needle's penetrating force into the material has been increased. This provides an improved responsiveness to heavy-
weight materials for the H type machine.
The W type has adopted a large shuttle hook, which reduces the frequency of bobbin-thread changing to enable
highly efficient sewing work.
The machine is provided as standard with an auto-lifter that uses a
stepping-motor system.
Many different models are prepared according to the type of materials.
Excellent workability and operability.
Application Code
Standard S
For heavy-weight materials H
For foundation F
For knits and knitted
materials
M
With large hook
for heavy-weight materials
W
Power supply Code
3-phase 200
~
240V E
Single-phase
200
~
240V K
CE 200
~
240V
(not provided with
power switch) N
Attachment Code
Not provided 000
Work clamp foot Code
Standard S
LK1902AN S000
Application Code
Standard S
For heavy-weight materials H
Attachment Code
Not provided 000
Work clamp foot Code
Standard S
LK1901ANS S000
Application Code
Standard S
Attachment Code
Not provided 000
Work clamp foot Code
Standard S
The direct-drive head (with no belt), which is directly connected to a compact AC servomotor, achieves outstanding
responsiveness and improved stop accuracy. This head helps create a comfortable working environment with reduced
vibration and noise.
The arm section of the machine head is fitted with a hand pulley. This allows the operator to visually check the
needle entry points.
The sewing starting point can be corrected.
The sewing starting point can be shifted in the X / Y direction. This enables the correction of a sewing pattern in
accordance with the presser foot configuration.
It is also possible to change over the stroke of the auto-lifter from a one-step stroke to a double-step stroke, which offers
easier positioning of a material on the machine. For the double-step stroke, an intermediate stopping height can be
established on the operation panel.
The presser foot lift can be set to a maximum of 17mm by using the reverse-rotation needle-up function in combination
with the auto lifter mechanism.
Please note when placing orders, that the model name should be written as follows:
●
To order, please contact your nearest JUKI distributor.
Operation panel Code
Standard panel SS
Part name Type Part No.
Feed plate blank Without knurl/with plating Sewing area 20
×
40 14120109
With knurl/with plating Sewing area 20
×
40 14120307
Without knurl/stainless steel
✽
Sewing area 20
×
40 14120505
Without knurl/with plating Sewing area 30
×
40 40021855
Without knurl/without plating Sewing area 30
×
40 40021856
Without knurl/stainless steel
✽
Sewing area 30
×
40 40021857
With knurl/with plating Sewing area 30
×
40 40021858
With knurl/without plating Sewing area 30
×
40 40021859
Work clamp foot
face plate (asm.)
Face plate for presser blank 14121263
Presser blank With knurl/with plating (right) Sewing area 20
×
40 14121701
With knurl/with plating (left) Sewing area 20
×
40 14121800
With knurl/with plating (right) Sewing area 30
×
40 40021851
With knurl/with plating (left) Sewing area 30
×
40 40021852
With knurl/without plating (right) Sewing area 30
×
40 40021853
With knurl/without plating (left) Sewing area 30
×
40 40021854
Work clamp foot blank
With knurl/with plating (right) 40021869
With knurl/with plating (left) 40021870
Needle hole guide A=1.6 B=2.6 With relief slit Standard type B2426280000
A=1.6 B=2.0 Without relief slit F and M types D2426282C00
A=2.3 B=4.0 Without relief slit for heavy-weight material 14109607
A=2.7 B=3.7 Without relief slit for extra heavy-weight material D2426MMCK00
Finger guard (1)
A=56.5 B=64 13533104
A=59 B=74 For extra-large bartacking 13548300
Finger guard (2)
A=66.5 B=43 For lengthwise bartacking 13573407
Finger guard (3)
A=21.5 B=35.5 L=67 For lengthwise bartacking 14135305
Finger guard (4)
A=21.5 B=35.5 L=58.5 For specially ordered work clamp 14120000
t=1.2
✽
Stainless steel t=0.5
t=3.2
S type
(Bartacking pocket lip of suits)
H type
(Bartacking crotch of jeans)
F type
(Attaching the shoulder straps to brassier)
M type
(Bartacking shoulder of running shirt)
✽
Presser foot for vertical bartacking is supplied with
the unit as an accessory.