The sewing machine complies with the "Juki Group Green Procurement Guidelines" on the use of
hazardous substances, which is stricter than other restrictions, such as those of the RoHS Directive.
As compared with the conventional model, the LK-1900AN reduces noise by 3.9dB and vibration by 1.65dB.
The RoHS Directive is an EU Directive limiting the use of 6 hazardous substances (lead, hexavalent chromium, mercury, cadmium, PBB and PBDE) in electrical and electronic equipment.
The Juki Green Procurement Guideline is the voluntarily established criteria to eliminate not only the aforementioned six substances, but also other ones which also adversely affect the environment.
For details of JUKI ECO PRODUCTS, refer to: http://www.juki.co.jp/eco_e/index.html
JUKI ECO PRODUCTS
The LK-1900AN series is an eco-friendly product which complies with JUKI ECO PRODUCTS
standards for protecting the environment
LK-1900AN-SS
(Table stand is optionally available.)
■
SPECIFICATIONS
LK-1900AN
SERIES
LK-1900AN
SERIES
The machine runs at 3,200sti/min, faster than any
other sewing machine ever made.
The proven computer-controlled
bartacking machine has been
dramatically evolved to be an
easier-to-use machine.
The machine runs at 3,200sti/min, faster than any
other sewing machine ever made.
The proven computer-controlled
bartacking machine has been
dramatically evolved to be an
easier-to-use machine.
The machine runs at 3,200sti/min, faster than any
other sewing machine ever made.
The proven computer-controlled
bartacking machine has been
dramatically evolved to be an
easier-to-use machine.
Active tension
The machine runs at 3,200sti/min, faster than any other
sewing machine ever made.
In addition to the high-speed sewing performance,
cycle time can be substantially decreased (reduced
approximately 30% compared to our predecessor model:
For 42-stitch large bartacks).
Higher productivity.
Since the machine is provided with an active tension mechanism, it is able to set a
needle thread tension that matches various sewing conditions (such as thread,
material and sewing speed) on the operation panel, store the data in memory
and reproduce it.
The needle thread tension can be separated according to stitching type or
portion of a seam, such as the beginning part of the seam, base stitched part,
zigzag stitched part and end of the seam (fastening stitch).
When the operation panel IP-410B is used in combination with the active tension,
the needle thread tension can be set on a stitch-by-stitch basis. This helps
eliminate undesired thread tension variations at a multi-layered part of a material
or with sewing direction, thereby contributing to upgraded seam quality.
The machine is provided as standard with the active
tension (electronic thread tension control mechanism).
Thanks to our advanced dry-head technology, the frame
(needle bar and thread take-up) no longer requires
lubrication. This prevents the material from being stained
with lubricating oil.
Just a small quantity of just clean oil is supplied from
the oil tank to the hook.
Oil stains are eliminated.
Wider sewing area and
many different sewing patterns.
The main shaft and the thread take-up lever mechanism
have been reworked to enable the reduction of noise
and vibration. As compared with the conventional model
LK-1900A, the noise is reduced by 3.9 dB and the
vibration is reduced by 1.65 dB.
The machine comes with a newly developed needle
thread grasping mechanism. The mechanism prevents
thread from slipping off from the needle eyelet at the
beginning of sewing, from tangling on the wrong side
of the material and also being stained during sewing.
The thread trimming mechanism has been further
improved to shorten the length of thread remaining
on the wrong side of the material after thread trimming.
Excellent seam quality.
Reduction of noise and vibration
With its 30mm (length) by 40mm (width) sewing area,
the machine can sew many different shapes of bartacks.
The machine is provided as standard with as many as
50 different types of sewing patterns including semilunar
bartacking, round bartacking, radial tacking as well as
conventional bartacks.
The LK-1900AN is also able to sew bartacks using the
same data used for the LK-1900 (EP-ROM).
Model name
LK-1900AN-SS
LK-1900AN-HS
LK-1900AN-FS
LK-1900AN-MS
LK-1900AN-WS
Application
Standard
For heavy-weight
For foundation
For knits and
With large hook
materials
knitted materials
for heavy-weight
materials
Max. sewing speed
3,200sti/min
＊
2,700sti/min
＊
Sewing area
30mm (L)
×
40mm (W)
Stitch length
0.1
~
10mm (0.1mm step)
Needle bar stroke
41.2mm
Lift of the work clamp foot
Standard 14mm (17mm when the reverse-rotation needle-up function)
Auto-lifter
Provided as standard (stepping motor type)
Needle thread tension
Active tension (electronic thread tension control system)
Needle
(at the time of delivery)
DP
×
5 (#14)
DP
×
17 (#21)
DP
×
5 (#11)
DP
×
5 (#11)
DP
×
17 (#21)
Hook
Standard shuttle hook
Large shuttle hook
Number of stitches
that can be stored in memory
Max. 20,000 stitches
Number of standard patterns
50 patterns
Number of data
that can be input
200 patterns (for up to 150 patterns, sewing data can be added.)
Enlarging/Reducing facility
20
~
200% (1% step), Pattern enlargement/reduction can be done by increasing/decreasing the stitch length
Memory medium
EEP-ROM, EP-ROM
Bobbin thread counter
Provided as standard (up/down method)
Lubrication
Hook: minute-quantity lubrication
Lubricating oil
JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
Sewing machine motor
Compact AC servomotor (direct-drive system)
Power consumption
450VA
Weight
Machine head (include motor) 47.3kg, Control box 11.3kg
Model name
Eyelet buttonhole
bartacking machine
Belt-loop attaching machine
LK-1901AN-SS
LK-1902AN-SS
LK-1902AN-HS
Application
Standard
Standard
For heavy-weight
materials
Max. sewing speed
3,000sti/min
＊
Sewing area
30mm (L)
×
40mm (W)
Stitch length
0.1
~
10mm
Needle bar stroke
41.2mm
Lift of the work clamp foot
Standard 14mm
(by using the reverse-rotation needle-up function 17mm)
Auto-lifter
Provided as standard (stepping motor type)
Needle thread tension
Active tension (electronic thread tension control mechanism)
Needle
(at the time of delivery)
DP
×
5 (#16)
DP
×
5 (#16)
DP
×
17 (#21)
Hook
Standard shuttle hook
Number of stitches
that can be stored in memory
Max. 20,000 stitches
Applicable pattern number
11, 12, 13
17, 18 (19, 20, 21, 22*)
*This device has been factory-set to
“invoking prohibited”
status at the time of delivery.
Number of data
that can be input
200 patterns (for up to 150 patterns, sewing data can be added.)
Enlarging/Reducing facility
20
~
200% (1% step), Pattern enlargement/
reduction can be done by increasing/decreasing the stitch length
Memory medium
EEP-ROM, EP-ROM
Material drawing amount
Max. 3mm
Bobbin thread counter
Provided as standard (up/down method)
Lubrication
Hook: minute-quantity lubrication
Lubricating oil
JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
Sewing machine motor
Compact AC servomotor (direct-drive system)
Power consumption
450VA
Weight
Machine head (include motor) 47.3kg, Control box 11.3kg
✽
“sti/min” stands for “Stiches per Minute”
✽
CompactFlash
or CFA specification compatible media.
✽
“CompactFlash
” is a registered trademark of SanDisk Corporation, U.S.A.
✽
Other company names and product names/brand names are trademarks or registered trademarks of the respective companies.
