JUKI HZL-NX7 Скачать руководство пользователя

Страница: 3 / 128

“IMPORTANT SAFETY INSTRUCTIONS”

When using an electrical appliance, basic safety precautions should always be followed, includ

ing the following: Read all instructions before using this sewing machine.

“DANGER

____ To reduce the risk of electric shock:”

1. The appliance should never be left unattended when plugged in.

2. Always unplug this appliance from the electric outlet immediately after using and before

cleaning.

“WARNING

____

To reduce the risk of burns, fire, electric shock, or injury to persons:”

Do not allow this appliance to be used as a toy. Close attention is necessary when this appli

ance is used by or near children. This appliance can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or instruction concerning use of the appli

ance in a safe way and understand the hazards involved. Children shall not play with the appli

ance. Cleaning and user maintenance shall not be made by children without supervision.

2. Use this appliance only for its intended use as described in this manual. Use only attach

ments recommended by the manufacturer as contained in this manual.

Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it

has been dropped or damaged, or dropped into water. Return the appliance to the nearest au

thorized dealer or service center for examination, repair, electrical or mechanical adjustment.

4. Never operate the appliance with any air openings blocked. Keep ventilation openings of the

sewing machine and foot control free from the accumulation of lint, dust, and loose cloth.

Keep fingers away from all moving parts. Special care is required around the sewing machine needle.

6. Always use the proper stitch plate. The wrong plate can cause the needle to break.

7. Do not use bent needles.

8. Do not pull or push fabric while stitching. It may deflect the needle causing it to break.

9. Switch the sewing machine off “O” when making any adjustments in the needle area, such as

changing needle, threading bobbin, or changing presser foot.

10. Always unplug the machine from the electrical outlet when removing covers, when lubricating

or when making any other user servicing adjustments mentioned in the instruction manual.

11. Never drop or insert any object into any opening.

12. Do not use outdoors.

13.

Do not operate where aerosol (spray) products are being used or where oxygen is being administered.

14. To disconnect, turn all controls to the off “O” position, then remove plug from outlet.

15. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

16. Basically, the machine should be disconnected from the electricity supply when not in use.

17. If the power cord of this appliance is damaged, it must be replaced with a special cord by

your nearest authorized dealer or service center.

18. (Except USA/Canada) This machine is provided with double insulation.

Use only identical replacement parts. See instructions for servicing Double-Insulated machine.

“SERVICING DOUBLE-INSULATED PRODUCTS”

In a double-insulated product, two systems of insulation are provided instead of grounding. No

grounding means is provided on a double-insulated product nor should a means for grounding be

added to the product. Servicing a double-insulated product requires extreme care and knowledge

of the system and should only be done by qualified service personnel. Replacement parts for a

double-insulated product must be identical to those parts in the product. A double-insulated prod

uct is marked with the words DOUBLE INSULATION or DOUBLE INSULATED.

The symbol may also be marked on the product.

“SAVE THESE INSTRUCTIONS”

“This sewing machine is intended for household use only.”

Содержание HZL-NX7

































































































































Результаты поиска

Содержание HZL-NX7

Отзывы:

Похожие инструкции для HZL-NX7

Бренды по названию

Популярные бренды

JUKI HZL-NX7, Инструкция по эксплуатации

Результаты поиска

Содержание HZL-NX7

Отзывы:

Похожие инструкции для HZL-NX7

Бренды по названию

Популярные бренды