background image

26

  4.9. Fabric, thread and needle table

Fabric

Thread

Needle 

HA×1

Light-weight
materials

Lawn

Silk thread …………………………… No.80,90
Spun  thread  …………………………  No.80,90

No.11

Georgette

Tricot

Spun  thread  …………………………  No.60-90

Knit needle

No.11

Wool and synthetic
fabrics

Silk  thread  ………………………………  No.80
Spun  thread  …………………………  No.60-90

No.11-14

Medium-weight
materials

Cotton and synthetic
fabrics

Spun thread ………………………… No.50, 60

No.11-14

Light jersey

Silk  thread  ………………………………  No.50
Spun thread ………………………… No.50, 60

Knit needle

No.11

Ordinary wool and
synthetic fabrics

Silk  thread  ………………………………  No.50
Spun thread ………………………… No.50, 60

No.11-14

Heavy-weight
materials

Denim

Spun  thread  …………………………  No.30-50

No.14-16

Jersey

Silk  thread  ………………………………  No.50
Spun thread ………………………… No.50, 60

Knit needle

No.11-14

Coat

Silk  thread  ………………………………  No.50

No.11-14

 *  In general, the same thread is used for both needle and bobbin threads.
 *  Thin thread and needle will be used for light-weight fabrics and thick thread and needle will be used for heavy

-

weight materials.

 *  Check that the combination of needle and thread is OK by trial sewing on the material which will be sewn.
 *  Knit needle is good for stretchy fabrics (such as knits) and synthetic fabrics.
 *  Use thread No. 30 - 90.
 *  When it is difficult to go over an overlapped section, guide the fabric by hand.
 *  When sewing “quilt patterns”, “decorative patterns” or “letters”, better finish will be ensured by using a knit needle.

Содержание HZL-NX7

































































































































Отзывы: