-5-
-5-
-5-
-5-
-5-
6. Front panel
7. Remove front panel and rear panel from frame.
Loosen setscrew (front) (18) in the front panel (Mas. asm.),
setscrew (right) (19) in the front panel main unit and
setscrew (bobbin winder) (20) in the front panel main unit after
removing the thread spool cover.
Draw out pattern dial (21) knob.
There are hooking sections on the rear sides of both front and rear panel as illustrated in
the figures below. They are “engaging with the frame holes” and “engaging with the
respective covers”.
mark section
mark section
(18)
(20)
(19)
Rear panel
Front panel
Rear panel
Front panel
Rear panel
Front panel
Rear panel
Front panel
(21)
