– 11 –
4-3. Threading the machine head
WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of
the sewing machine.
4-4. Installing and removing the bobbin case
WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of
the sewing machine.
1) Open hook cover
1
.
2) Rase latch
3
of bobbn case
2
, and remove
the bobbn case.
3) When enterng bobbn case, nsert t wth the
latch tlted untl "clck" sounds.
If it is not fully inserted, bobbin case
2
may slip off during sewing.
1
3
2
4-2. Attaching the needle
1
2
WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of
the sewing machine.
Loosen setscrew
1
and hold needle
2
wth the long
groove facng toward you. Then fully nsert t nto the
hole n the needle bar, and tghten setscrew
1
.
When tightening setscrew
1
, be sure
to use the screwdriver (Part No. :
40032763) supplied as accessories.
Do not use L-shaped hexagon wrench
key. There is a danger of breaking set-
screw
1
.
1.5mm
