LK-1850 SERIES (June, 2001) 1/4
Starting
pedal
Work
clamp foot lifting pedal
Neutral
Lowering the
work clamp
foot
Starting the
sewing
machine
LK-1850
Model name
Max. sewing speed
Needle bar stroke
Lift of the work clamp foot
Needle (at the time of delivery)
Hook
Feed mechanism
Stitch adjusting system
Thread trimming system
Wiper
Lubrication
Lubricating oil
Weight of the machine head
Motor
LK-1850 series
2,300rpm (1,800rpm for synthetic thread)
41.2mm
Max. 17mm
DP
×
5 (#16) #11
〜
#16, For JE: 134 (Nm100) Nm75
〜
Nm160
<H, G type> Di
×
3 #23, For JE: 332 Nm160
Standard shuttle hook
Cam control system
Provided with a nut-fixed feed adjusting lever
Thread spreader interlocked with main shaft and thread trimmer interlocked with foot lifter
Interlocked with lifter
Centralized oil wick lubrication
JUKI New Defrix Oil No. 2 (equivalent to ISO VG32)
42.5kg
Single-phase/3-phase 200W (1/4 HP) induction motor
●
In addition to the capability of low-tension stitching, the prevention of
loose stitches at the start and end of sewing using synthetic threads is
assured. The use of JUKI’s unique thread trimming system, coupled
with the low-tension sewing capability, have further upgraded the
sewing performance. The formation of even stitches of high quality is
assured regardless of the type or size of threads used.
●
The lower clamping plate has been flattened and the feed cam has been
made compact by limiting the sewing size and the number of stitches.
The result is a wider sewing area. Furthermore, the work clamp foot
lift is as high as 17mm. By these improvements, a workpiece can be
handled more easily without concern about the workpiece becoming
caught in the cam.
●
The machine features a higher sewing speed and shortened cycle time,
and is provided with a new smooth thread winder. The machine has
various other improvements that lead to higher efficiency, including a
pedal that requires low pedaling pressure, a work clamp foot that
ensures free finger action, and a face plate that allows the needle entry
point to be seen at a glance.
LK-1850 SERIES
High-speed, 1-needle, Cylinder-bed Lockstitch Bartacking Machine
SPECIFICATIONS
WHEN YOU PLACE ORDERS
LK-185 - U
Code
0
2
3
4
Number of stitches
42 stitches
28 or 14 stitches
36 stitches
42 or 21 stitches
Code
H
G
Application
Standard
For heavy-weight
materials
For extra heavy-
weight materials
Subclass number
Refer to the subclass
machines list
Code
T
P
Pedal
One-pedal unit (provided with a
pedal- pressure-decreasing unit)
Two-pedal unit (provided with a
pedal-pressure-decreasing unit)
Two-pedal unit
*1. Pedal-pressure-decreasing unit:
It mechanically actuates the pedal, to reduce operator's
fatigue in raising the work clamp foot, etc. Since this is a
mechanical feature, the operator cannot stop the work
clamp foot at its intermediate position or lower it slowly.
*2. P type unit:
The work clamp foot is raised or lowered by the lever system
in accordance with the amount of pedal depression.
This feature is very advantageous for a process that requires
accurate positioning of the material.
2-pedal system
(Standard)
1-pedal system
8
