16
Exit settings
In the settings state,
pressing
MODE
(for less than 2s) confirms the current input.
Holding
MODE
(for more than 2s)
saves
the new settings, and exits all settings.
Holding
DOWN
(for more than 2s)
cancels
without saving any changed settings, and returns to
the previous menu.
After one minute of inactivity the display will exit settings, without saving.
Recover default settings -
dEF
Press both
UP
and
MODE
for
more than 2 seconds to enter the recovery option.
Press
UP
or
DOWN
to choose Y (replace all settings with the default values) or N.
Hold
MODE
The display then shows
DEF-00
, and will then return to its general display state.
Recover Default Settings Screen
Safety notes:
•
The Juicy Bike LCD Display is only for use with a compatible Juicy Bike model
•
Always switch off all power at the main bike battery before disconnecting or re-
connecting the LCD Display.
•
Take particular care to line up the male connector plug of the display with the
female plug on the bike. Check for the orientation arrows on each part and use
minimal force.
•
Position the display so that cables and connectors are not subjected to any strain,
even when your handlebars are adjusted for riding or during
•
Never attempt to dismantle the display
•
Do not use your bike with power until any error code has been remedied
Warranty scope:
Standard Juicy Bike Warranty is applicable to cover for replacement in the event of faults
arising from manufacturing defects subject to the display being used with due care as
outlined above and for 12 months from purchase. See the Juicy Bike Website
(
) for full terms.
