5
CHARGE OF THE BATTERY OF THE DRONE
1. Turn off the Nanodrone vCam HD 3
Turn your drone and move the switch on
the bottom left (“OFF”).
2. Now extract the battery by removing
following the direction of the arrow.
3. To charge the battery, insert it into the
charger as shown in the picture (watch the
correct position and not use force). Now
connect the other end to the USB port of a
PC. The charger LED is off during charging,
lighting when the battery is charged.
CHARGING TIME:
The battery takes about 70 minutes to load for 6-8 minutes per battery flight autonomy.
ON
off
CHA
ON
off
CH
A
1
2
3
3
PRECAUTIONS FOR BATTERY CHARGING
1. During charging, place the battery and charger in a dry, ventilated area away from sources
of intense heat or flammable products.
2. During charging, disconnects the battery of the drone. It is important that the battery
charge be supervised by an adult to prevent accidents.
3. Do not charge the battery as soon as you finish flying. Wait for the battery to cool down,
otherwise the battery may swell, explode or burn.
4. ensured you to use the original USB charger provided with the drone. When you’ve used
enough battery or see it’s a little swollen, exchange the battery for another.
5. A battery that is not used for a long period of time lose their charge.
Charge or discharge a battery often shortens its lifetime.
