4
DEPARTURE
PRECAUTIONS
1Turn on the Nanodrone VCam HD 3
Turn the drone and changes the switch on the
bottom, to the right (“ON”).
1 When the control LED of the drone remains on but flashes slowly, it indicates that
synchronization has not been performed correctly. Turn off the drone and returns to perform
the “departure” from the beginning.
2. If to start flying the drone does not remain stable, lands, turn off the control and the drone
and returns to synchronize them watching drone position on a flat, horizontal surface.
3. When the drone LED blinking slowly means that the battery is running out. Lands and
carries the drone of the battery with the USB charger provided.
2. Turn on the control by pressing the on / off
button.
The control will emit 3 beeps and the red LED will
light flashing.
3. Move up the power lever to the maximum
and then lower it to the maximum.
The control emits a long beep which means that
the control and the drone are synchronized.
Your Nanodrone vCam HD 3 is ready to fly.
Horizontal
position
ADVICES:
When you synchronize your Nanodrone vCam HD 3
ensured that it is on a flat, horizontal surface so that the
flight is stable.
OFF ON
CHA
