Installation by a technical service provider
3.5
Mounting the device
CAUTION
For proper sealing the profiled
side of the profile flange seal must
point towards the rotary flange fit-
ting (see chapter 3.4). If this is not
observed, the sealing may not be
perfect resulting in water escaping.
Fig. 4:
Align the seal profile with the
rotary flange fitting
3.5.1 Installing JJD 4
The dosing pump is connected directly as a
unit in combination with the water meter.
Do not undo the screws on the rear side
of the device!
Procedure:
1.
Insert the heads of the four flange
screws through the bayonet holes on
the rotary flange fitting (see Figure 5).
Fig. 5:
Place and engage
1
Feed screws through
2
Turn clockwise to engage
12
JUDO JULDOS
1703383 • 2022/10
