JTS IN264R Скачать руководство пользователя страница 8

2

IN

4

6

Music

INFINITY

Life

12

13

~

Handheld and Body Pack Setting List

Sensitivity

Settings

Synchronization

ON/OFF

0 dB is the highest sensitivity

There are 100 ID codes.

When ID code is OFF (id OFF), the transmitter will

accept any synchronization from any IN264R.     

“On” means “REMOSET” function always opens;

“OFF” means “REMOSET” function is turned off

ID code ON/OFF

ID code select

Lock ON

button unlock

button lock

6. Specification

6-1 IN264R

6-2  IN264TH

6-3  IN264TB

Frequency Preparation....
Remoset............................

Carrier Frequency Range
S/N Ratio............................
T.H.D..................................
Display...............................
Display Contents..............

Controls.............................
Audio Output Level..........
AF Output Impedance......
Squelch..............................
Operation Voltage.............
Output Connector.............
Dimension(m/m)...............

PLL Synthesized Control
Radio Frequency : 2.4GHz
Effective distance: 10m
502~960 MHz
>105dB
<0.6%@1KHz
LCD
Channel, Antenna A/B, Mute Display, RF/AF Level Meter, 
Low battery, ID Number
Power On/Off, Frequency Up/Down, Lock-on, ID Pairing, Remoset
-12dB

ȍ

Pilot Tone & Noise Mute
12-18 VDC, 600 mA
2 XLR Balanced  Socket  / 1 Ø6.3mm unbalanced phone jack
420mm(W) * 44mm(H) * 211mm(D)

PLL Synthesized Control
502~960 MHz
10mW
±10KHz
±48KHz
Channel, Battery Fuel Gauge, 
ID Number
Power On/Off, AF Level, Frequency 
Up/Down, Lock-on Mode,ID Pairing
<-50 dBC
50~16,000 Hz
UM3, AA 1.5V*2

Frequency Preparation.........
Carrier Frequency Range.....
RF Outputs............................
Stability..................................
Frequency Deviation.............
LCD Display...........................

Controls.................................

Spurious Emissions.............
Audio Frequency Response
Battery....................................

Frequency Preparation........
Carrier Frequency Range....
RF Outputs............................
Stability.................................
Frequency Deviation............
LCD Display..........................
Controls................................

Output connector.................
Spurious Emissions.............
Audio Frequency Response
Battery...................................

PLL Synthesized Control
502~960 MHz
10mW
±10KHz
±48KHz
Channel, Battery Fuel Gauge, ID Number
Power On/Off, AF Level, 
Frequency Up/Down, PAD, Gain Control
Lock-on Mode, ID Pairing
4P mini XLR
<-50 dBC
40~18,000 Hz
UM3, AA 1.5V*2

Содержание IN264R









Отзывы: