JTS IN264R Скачать руководство пользователя страница 7

2

IN

4

6

Music

INFINITY

Life

10

11

5-6 Lock ON Function

Receiver

A) Press "Set" button for  3 seconds to enter setting window

B) Press "Set" again until the Lock setting window shows.  (Figure 10)

Notice: Original setting is lock off (Lo OF).

C) Press "     Up" or "     Down" button to 

                 select the mode between "Lock On"       

and "Lock off".

D) After setting, press "Set" again to  

                 save the setting.

To release the “Lock ON”

A) Press “Set” for 2 seconds.

B) Press “down” to select  “Lock OFF”.

C) Press “Set” to store.  

Handheld and BodyPack transmitter

A) Press "Set" button for  3 seconds to enter setting window. (Figure 11)

B) Press "Set" again until the Lock setting window shows.

Notice: Original setting is lock off (Lo OF). 

C) Press "    Up" or "     Down" button to select the mode between "Lock On"

                 and "Lock off".  

D) After setting, press "Set" again to save the setting.

To release the “Lock ON”

A) Press “Set” for 2 seconds.

B) Press “down” to select  “Lock OFF”.

C) Press “Set” to store.  

5-7 Adjust the sensitivity of the microphone

Handheld transmitter

A) Press "Set" button for 3 seconds to enter 

                 setting window. (Figure 12)

B) Short press "Set" until the sensitivity 

                setting window shows.

C) Press "    Up" or "     Down" button to 

                 select the sensitivity among  0db, 

                 -3db, -6db,  -9db, -12db, -15db, -18db 

                 and -21db.     

D) After setting, press "Set" again to 

                 save the setting.

BodyPack transmitter

A) Use the screwdriver        included to  adjust the 

                 sensitivity from gain control       . (clockwise is "increase")

B) If further adjustment is needed please adjust the pad.

5-8 Adjust the transmitting power

Handheld/Body Pack Transmitter

A) Push the "Set" button several times until the "rF Lo " or "rF Hi" flashes.

B) Then push "Up" to choose "Hi" for high transmitting power and push

                "Down" to choose "Lo" for low transmitting power.

C) Push the "Set" again to save the setting.

29

25

26

Figure 10

                

SET

            ▲

AF

RF

Figure 12

3”

Figure 11

3”

SET

+

-

IN

4

2

6

TB

3”

Содержание IN264R









Отзывы: