User Manual
5
800.321.6221
GuestCall Extreme Coaster Paging System
Part Number: EXCPGR100, Model Number: JP2101
Set Sleep Time
This system has an “ALL SLEEP” function that turns off all battery pagers (for example, manager pagers) at once
automatically.
To turn this feature on:
>
Scroll to the SET SLEEP TIME menu screen.
>
Press the # / SELECT key to turn sleep time ON or OFF.
>
Press the ENTER key to edit the time to turn the pager off.
>
Set the hour then press ENTER key.
>
Set the minutes and press ENTER key.
>
Select AM or PM, Press ENTER.
>
After the correct time is set, press ENTER key to save.
>
Press CANCEL to exit.
Range Test
Turning this feature on and walking around with your pagers will give you an idea of the range of your transmitter.
Transmitter will send a signal to the pagers for this range test. Pagers will light up each time that the pagers receive
the message from the transmitter.
When testing range, use 3 pagers to ensure that you have the most accurate reading. When you have reached a point
where ALL 3 pagers do not receive 2 consecutive pages then you are out of range.
Performing Range Test
>
Scroll to RANGE TEST.
>
Press the # / SELECT key to turn the out of range ON or OFF.
>
Press ENTER key. Transmitter will send page to all pagers every 10 seconds.
>
Press CANCEL to stop the range test.
>
Press CANCEL to exit.
Set Pager Alert
This will allow you to change the pager alert type (flash, vibe, and beep.)
>
Remove all pagers from the charging unit or unplug the power supply that is connected to the first charging
rack.
>
Scroll until the display reads Set Pager Alert. Current alert time setting will show.
>
Use #/SELECT to scroll through the options. Press ENTER three times. Pager will flash to indicate it receives
the new command.
>
Press CANCEL to return to the paging screen.
