User Manual
4
800.321.6221
GuestCall Extreme Coaster Paging System
Part Number: EXCPGR100, Model Number: JP2101
System Use
Distributing a Pager
>
Remove a pager from the charger.
>
The pager will flash and vibrate to preview what the alert will look like for the guest.
>
Hand the pager to the guest, stating that the pager will go off with they have been paged.
Paging a Guest
>
To page a guest, enter the 1 to 4-digit pager number into the transmitter and press SEND.
>
The pager will alert until it is returned to the charger.
Setup is Complete
If you have any additional questions, please contact us at the addresses below.
System Configurations
System Default Configuration
The paging system was set to default settings listed below prior to shipment.
>
Pager alert is set to Vibe and Flash
>
Out of Range is set to OFF
>
Alert Time is set to 60 seconds
To enter
programming mode
, on the transmitter, press
SETUP
, use password
1379
and press
ENTER
.
Use the
*/MENU
button to scroll and the ENTER button to choose the menu option.
Once you have saved your changes, press CANCEL twice until you return to the main PAGER # screen.
Set Current Time
>
Scroll to SET TIME, Press ENTER.
>
Set Hours, Press ENTER.
>
Set Minutes, Press ENTER.
>
Press 1 or 2 for AM/PM, Press ENTER.
>
Press ENTER to save.
>
Press CANCEL to exit.
