JSTRON A6 Plus, Руководство пользователя

Страница: 30 / 47

Page 27 of 43
lower-left, and lower-right, respectively corresponding to the four input ports.
2. DVI panel card settings
Select the DVI interface, set the parameters in the adjustment column on the right,
select the resolution in the EDID list and apply it, and flash it successfully.
3. VGA panel card settings
Select the VGA interface and set the parameters in the adjustment column on the
right
6.1.3 Monitor panel settings

Select the MVR1 interface and set the parameters in the adjustment column on
the right

Preview program mode: 2X2 4X1 mode selection

Input page selection: 5 pages in total, one page can monitor 6 input sources

MVR1 and MVR2 for monitoring output

Select the AUX1 interface and select the input source in the adjustment column
on the right

Select the AUX2 interface and select the input source in the adjustment column
on the right

AUX output resolution is 1920X1080P60
1. EDID

Display the current source type and resolution

Select the resolution from the EDID list and apply it

The signal line needs to be unplugged before setting
the EDID of VGA

VGA refers to the phenomenon of image offset and
off-color in the analog signal, which is adjusted by
automatic adjustment and ADC correction.

Horizontal coordinates: manually adjust the horizontal
coordinates of the screen

Vertical coordinates: manually adjust the vertical
coordinates of the screen

Horizontal clock: manually adjust the horizontal clock
of the screen.

Clock phase: manually adjust clock phase of the screen