JSTRON A6 Plus, Руководство пользователя

Страница: 29 / 47

Page 26 of 43
1. 4K panel card settings
Select 4K interface and set parameters in the adjustment column on the right, as
shown in Figure 6.1
Figure 6.1
Figure 6.2
Example: as shown in Figure 6.2, the input mode is 4K2K, and the four physical ports
are converted into logical ports and divided into four images of upper-left, upper-right,
1. EDID

Display the current source type and resolution

Select the resolution in the EDID list and apply it, and
flash it successfully
2.4K Mode

Reset 4K mode and default to 2K1K mode

Select 4K mode from the list and apply it

Current physical interface

Logical interface, logic diagram
Note: the actual input signal is predominantly a "logical
interface" signal, as illustrate in Figure 6.2
3.4K interception

Reset: reset interception parameter to default

Horizontal width: intercept screen with horizontal size

Vertical height: intercept screen with vertical size

Horizontal start: move to intercept horizontal position

Vertical start: move to intercept vertical position

Interception refers to intercept the current input source

Select the value to be set, type the value through the
numeric keyboard, press Enter to apply, and the others
can be set in this method