JSR Cold Fog, Руководство пользователя

Страница: 8 / 9

DO NOT
Do not Spray flammable liquids near open flame ore other source of ignition.
Do not Use a machine that is broken oe damage in any way.
Do not Alter the machine by adding or remove parts.
Do not Restrict the motor blower inlet area.
Do not Tamper with the output nozzle.
Do not Allow the machine to operate unattended.
Do not Apply more than one gallon of formulation per 50.000 cubic feet (2,7 Liters per 1,000 cubic
meters) enclosed space.Exeeding this concentration is both hazardous and wasteful.
MAINTENANCE
1. Periodically clean the formulation tank using a hot water/detergent solution.Fully open the
machine valve and operat the machine for 3 to 5 minutes, flushing the solution through the valve,
lines and nozzle,
2. Examine the electrical cord for evidence of damage and replace any damaged cord
immediately.
3. If becomes necessary to disassemble the Machine Flow Valve for cleaning, be careful not to
enlarge the metering orifice or damage the taper of the valve steam, as this will affect the calabration
of the machine.
-4-