background image

baTTERY chaRGiNG iNSTRUcTiONS

To charge the Venom, first make sure that the power switch is on. Remove the battery cover 
from the underside of the Venom and connect the charging cable to the battery. Plug the 
USB plug into a computer USB socket and the Venom will charge. The LED will remain lit while 
charging, and will extinguish when the battery is fully charged.

Notes:

The Venom charges in 40 - 50 minutes. The flight time is approx. 6 - 8 minutes. After use,

allow the battery to cool for 5 - 10 mins before charging. Ensure the motors have cooled 

before flying.

Warning on li-poly battery:

Do not put the battery into fire or near a high heat source.

Do not place battery onto hot surfaces.

Keep the battery in a dry and low-temperature environment.

Only use the charger supplied to charge the battery.

Do not over-charge the battery.

Do not connect the battery with other circuits.

Turn off the power of the product immediately after use to save battery power.

bEST cONdiTiONS fOR fliGhT

Do not fly in strong winds. High winds will greatly affect the control of the Venom.
Do not fly in extreme temperature, these will affect the battery and the time of flight of the 
Venom. Where possible, fly the Venom in wide-open spaces, away from buildings, animals and 
other people.

NOTicE:

Be sure to fly the Venom in plenty 
of open space. If the indicator 
light on the control begins to 
flash, the batteries are low on 
power and may need replacing.

Distance

of 3M

Distance

of

2.5M

Distance of 3M

Distance of 2M

Dista

nce

 o

f 3

M

FIGURE 1

FIGURE 2

Содержание Venom 4









Отзывы: