JRI SPY RF Tc, Руководство пользователя

Страница: 21 / 24

©Jules Richard Instruments 21
a
VI. BATTERY CHANGE
When the SPY RF battery has to be replaced, the LCD screen displays the following message:
To replace the battery, follow the instructions below:
VII. FEATURES
FEATURES SPY RF TC
Measurement range Depending of the sensor used in the limit
of -200 +1370°C
Number of channels 1 or 2
Type of input Thermocouple K
Accuracy ±0,3°C on full range without sensor
Recording interval 1s to 90 min
Memory size 20 000 measurements
Operating conditions -30 +70°C
Temperature for storage -40 + 85°C
Radio range (in free field) 1 km
Radio band 868MHz
Battery lifetime 2 years
Dimensions 123x69x30mm
Protection level
IP65
CE ERM conformity EN 301 489 / EN 61000 / EN 61010
EN 55022 / EN 300 220
1
2
3
Open the battery cover
Pull up the connector “a”
Shunt the 2 pins on the board
Plug the new battery
Change the seal
Close the battery cover
Beware
Keep the battery far from fire. Don’t
try to reload it or to short-circuit it.
Never unscrew.
this can cancel
the guaranty
!
!
BEWARE: ONLY USE BATTERIES SUPPLIED BY JULES RICHARD INSTRUMENTS (REF: 06569)
DOWNLOAD THE MEMORY BEFORE CHANGING THE
BATTERY. NEVER WAIT UNTIL THE BATTERY IS
EMPTY OR THE DATA WILL BE DELETED.
!