©JRI Maxant
16
I.
Introduction
Congratulations, you own a SPY RF Ethernet Modem ! This device is equipped with 1 or 2 inputs (digital or logical…). It
enables you to record 1 or 2 physical parameter (depending on the model) and to transfer wireless the recorded data by
radio frequency to a PC.
The SPY RF Ethernet Modem complies with EN 12830, only with temperature probes.
a)
Equipment
1 SPY RF Ethernet Modem
1 wall-mounting bracket
1 connector protection
1 user manual
1 adhesive plaster
b)
Symbols
II.
INSTALLATION RECOMMENDATIONS
The Spy RF is a recorder of physical parameters able to communicate wirelessly with the operating software SIRIUS.
The wireless communication is based on radio frequency. As we are daily in contact with it (radio, TV…) it is easy to think
that it always works. This is true if basic rules on the positioning of recorders are respected because wireless communication
is subject to perturbations.
a)
Perturbations sources
Presence of obstacles in the way of the waves between the Spy RF ModeM and the Spy Rf (wall, ceiling, person,
furniture…) or close to the antenna.
Obstacles thickness in the way of the waves. The absorption is more important in diagonal as perpendicularly
Waves cannot pass through full metallic walls. On the other hand, a perforated wall allows the waves passing with
attenuation
RECYCLING : do not throw in a rubbish dump or in a domestic waste container. Comply with the regulation to throw away the device.
POWER SUPPLY : this device is powered by a continuous current delivered by a main power supply adaptor (230VAC). Comply with
the security and utilization regulations of electric power. Use an electric installation complying with these regulations
CE MARKING :this equipment is certified to comply with the European regulation for the electric security, inflammability, disturbing
radiation emission and immunity to surrounding electric disturbances.
FCC ID: 09586 / 09587
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation
In accordance with FCC requirements, changes or modifications not expressly approved by JRI Maxant could void the
user's authority to operate this product.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense
