JRC JSS-296 -, Руководство по обслуживанию

Страница: 78 / 220

4.7.7 User Definitions (Level 2 MENU)
Both press and to access the following the level 2 menu.
MENU
No.
Item Function Parameter Default
Setting
16 INITIAL Initialize storage memory except
for TX power data.
17 MEM CLR Initialize storage memory
individually. MD: ATU matching data
CH: All user channels
USR: User setting parameter
TX BAND power data
PWR: TX power data
PA : NAH TX power data
18 DATADISP Display the meter function. ANT: Antenna current
SWR: PA(PA output of JSB)
ATU(ATU input)
PA: Vc, Ic
(Collector voltage and
current of JSB)
19 LC CONT Display the ATU matching data and
change the matching parameter.
20 ATU CHK Check the ATU relay. (Visual check)
21 ATU PASS Initialize the ATU relay.
(Matching through) ON/OFF
OFF
22 ATU SPD Change the ATU matching speed. NRM: Normal speed
SLW: Slow speed
NRM
23 AUTOTUNE Perform continuous tuning for user
channels par 1 Group.
24 2182MODE Select the 2182kHz emission mode. TEL/AME (H3E) TEL
25 10KEY Disable the free-input frequency
operation.
(Only user channel operation) ON/OFF
ON
26 TX DELAY Set the transmission switchover
delay to 70ms. (for BK Relay) ON/OFF
OFF
27 RFTHRUGH Disable the Variable tuning
function.
ON/OFF
OFF
28 TESTTONE Use the test-tone for TEL or LSB
mode. ON/OFF
OFF
29 MAX POWER Set the output model for the rated
transmitting power.
30 LSB MODE Enable the LSB mode operation. ON/OFF OFF
31 LSB TRX Enable the LSB transmission. TRX: Enable transmitting
RX: Reception only
RX
32 AME TRX Enable the AME (H3E)
transmission. TRX: Enable transmitting
RX: Reception only
RX
33 CHECK2 Perform the self-diagnosis with
check item.
34 MIC GAIN Change the MIC gain.
0.0 (-25.0dB)
～
25.0 (0.0dB)
～
50.0(+25.0dB)
35 ADJ POWER Change the output power for user
registration channel.
0 (no power)
～
255 (+3.0dB)
36 SPEECH-P Set the Speech-processor function. ON/OFF
ON
37 KOREA Change the operation and
parameter for sale to KOREA. ON/OFF
OFF
38 ATU TYPE Select the ATU type. NFC: NFC-196/296/896
OP1: For other tuner setting 1
OP2: For other tuner setting 2 NFC
POWER
MENU
74