JRC JSS-296 -, Руководство по обслуживанию

Страница: 21 / 220

3.2 MF/HF RADIO EQUIPMENT INSTALLATION
Do not place this equipment anywhere vibration or impact is likely to occur.
Doing so may cause a fall or damage to property and persons.
Do not install this equipment in a place near water or in one with excessive
humidity, steam, dust or soot. Doing so may cause fire, electric shock, or
malfunction.
CAUTION
Install the JSS-296/596/896 MF/HF Radio equipment in a location that meets the following conditions:
・
A location with minimum vibration.
・
A location with sufficient ventilation.
・
A location 1.5 m or further from a magnetic compass.
3.2.1 AC and DC connections
JSS-296/596/896 is connected with power source by DPYCY cable. (Refer to Figure 3-2).
Figure 3-2 Power Cable connection
AC current
The maximum current is as follows.
Maximum current = JSS-296/596/896 + SES + VHF
×
2
It is as follows, in connecting JUE-75C as SES and connecting JHS-32B as VHF.
Maximum current of 220V operation (JSS-296)
= 7A (JSS-296) + 1.5A (SES:JUE-75C) + 1A
×
2 (VHF:JHS-32B)
=10.5A (220V)
DC current
The maximum current of DC24V is 40A.
Terminal block width
Even a 35mm
2
cable can connect with the Terminal block.
AC BATT
1 2 3 4 5 6
+ + - -
24V
Battery
GMDSS Console/NCU-692
Terminal block
D
P
YC
Y-
xx
D
P
YC
Y-
xx
+
-
U V
AC
DP
Y
CY-yy
Terminal width:35mm
2
Maximum DC current:40A
17