JRC JSS-2250, Инструкция по эксплуатации

Страница: 132 / 220

Operation
4-82
4.9 Popup screens
( １ ) Popup screens of the controller
The contents of the popup screens of the controller are as follows (in alphabetical order).
Message Buttons Description
Access denied
Another controller is currently in use.
OK
Cannot obtain the access right
because another controller is
currently in use.
Attention
DISTRESS stopped by another unit.
OK
Stopped the distress alert by another
unit such as DMC.
Attention
Failed to send the DSC message.
OK
Cannot send DSC message for some
reason.
Attention
In principle, the ACK should be sent by a
coast station.
Continue/ Cancel
In principle, distress
acknowledgement is sent by coast
station.
Continue: Continues the operation.
Cancel: Cancels this operation.
Attention
Left without operating.
The menu will be closed automatically,
soon…
Cancel
This process will be canceled and
returns to the status display
condition because the controller has
been left for 10min without operating.
Cancel:
Cancels the shutdown.
Attention
No DTE available.
OK
On the interval period of the distress
call specifying the FEC mode, the
distress key have been pressed at
the controller connecting no DTE.
Attention
Normally, the relay call should be sent to a
coast station. Continue/ Cancel/
OK*
(*drobose call only)
Normally, DSC distress relay
acknowledgements are sent to a
coast station.
Continue: Continues making call.
Cancel: Stop making call.
OK:
Continues making call.
Attention
Now continuing the distress call mode.
Break this mode?
Continue/ Break
Pressed the CANCEL key during the
distress call mode. Is it ok to break?
Continue: Continues the distress
mode.
Break: Breaks the distress mode.
Attention
Resending the distress call soon...
Cancel
DSC resends the distress call
automatically soon.
Cancel:
Shows the confirmation
popup for the distress
mode termination.
Attention
Restart the system to use the DTE.
OK
When setting the menu 7.6 Option to
connect the data terminal, restart the
system to
Attention
Tuning the antenna to the frequency now.
Wait a moment, please.
-----
Tuning the antenna.
Wait a moment.
Channel/frequency dial operation is invalid
right now.
To enable it, press FUNC, and ENT. -----
The channel operation with the jog
dial is disabled right now. To enable
it, press the FUNC key and ENT in
order.
Data sending… Cancel
Updating user channel information on
other controller using the Data
transfer menu.
Cancel: Cancels
update.