JRC JMA-9110-6XA, Инструкция по эксплуатации

Страница: 164 / 280

3 － 44
JMA-9100 Instruction Manual
>
3.BASIC OPERATION
>
3.5 USE OWN SHIP'S TRACK
3.5.7 Use Water Depth Track (Water Depth Track)
Set the corresponding conditions for the water depth value and the color of own
ship's track by performing the operation below.
Procedures
1) Open the Water Depth Setting menu by performing the menu
operation below.
→
The Water Depth Setting menu will appear.
Enter a value of the boundary water depth for each item according to the table below to set
up the corresponding conditions for the water depth value and the color of own ship's track.
For example, if 10m is entered for 1. , 30m is entered for 2. , and 50m is entered for 3. , the
area with a water depth of less than 10 meters is indicated by white tracks, the area with a
water depth of 10 to 30 meters is indicated by light blue tracks, and the area with a water
depth of 30 to 50 meters is indicated by blue tracks.
Water depth
value Color of track
White
1. xxxx m Min
Gray
2. xxxx m
Blue
3. xxxx m
Green
4. xxxx m
Yellow
5. xxxx m
Pink
6. xxxx m Max
Red
Track
6. Water Depth Setting