JRC JMA-5912-6 Скачать руководство пользователя страница 156

Страница: 156 / 466

3-61

4 Move the cursor mark to the destination, and press the [ENT] key.

The selected mark or line is moved to the destination.
To move another mark or line, repeat procedures 3 and 4.

5 When finished with the correction of lines and marks, press the [0]

key.

The cursor mode changes to the normal operation mode, terminating the user map
move mode.

(Example)

Deleting a mark or line (Delete)

With regard to the created user map, a mark or line is deleted individually.

Procedures

1 Open the Edit User Map menu by performing the following menu

operation.

Plot

→

2. Mark Operations

→

2. Edit User Map

2 Press the [4] key.

The user map delete mode is selected.

Delete Map is displayed in the cursor mode (upper right of the display on page

2-3).

3 Put the cursor on a mark or line, and press the [ENT] key.

The selected mark or line is deleted.
To delete another mark or line, repeat procedures 3.

4 When finished with the correction of lines and marks, press the [0]

key.

The cursor mode changes to the normal operation mode, terminating the user map
delete mode.

Содержание JMA-5912-6



















































































































































































































































































































































































































































































Результаты поиска

Содержание JMA-5912-6

Отзывы:

Бренды по названию

Популярные бренды

JRC JMA-5912-6, Инструкция по эксплуатации

Результаты поиска

Содержание JMA-5912-6

Отзывы:

Бренды по названию

Популярные бренды