manualshive.com logo in svg

JRC JMA-1030 Series, Инструкция по эксплуатации, Страница: 104 / 198

Поделиться
Скачать
JRC JMA-1030 Series Скачать руководство пользователя страница 104

 

 

Chapter 5    VARIOUS FUNCTION ICONS

 

70 

5.12.1  PULSE LENGTH 

 
The transmission pulse length is changed by adjusting the range. 
 

Range 

Pulse Length(JMA-1032) 

Pulse Length(JMA-1034) 

0.0625NM SP1 

SP1 

0.125NM SP1 

SP1 

0.25NM SP1 

SP1 

0.5NM SP1/MP1 

SP1/MP1 

0.75NM SP2/MP1 

SP2/MP1 

1NM SP2/MP1 

SP2/MP1 

1.5NM SP2/MP1/MP2 

SP2/MP1/MP2 

2NM SP3/MP1/MP2 

SP3/MP1/MP2 

3NM SP3/MP1/MP2 

SP3/MP1/MP2 

4NM SP3/MP1/MP2 

SP3/MP1/MP2 

6NM MP2/LP1 

MP2/LP1/LP2 

8NM MP2/LP1 

MP2/LP1/LP2 

12NM MP2/LP1 

MP2/LP1/LP2 

16NM MP2/LP1 

MP2/LP1/LP2 

24NM LP1 

LP2 

32NM  

LP2 

48NM  

LP2 

 
SP(Short Pulse): The transmission pulse length becomes shorter, and the range resolution improved.   

The suppression of sea clutter return or rain/snow clutter return is heightened.   
Recommended conditions are following. 

・

In bays / harbors and narrow waterway where targets are densely crowed. 

 

             

  ・

Rough sea state due to torrential rain or stormy weather. 

 
MP(Middle Pulse): The normal transmission pulse length is set. Both range resolution and sensitivity are 

appropriately set. Recommended conditions are General navigation. 

 
LP(Long Pulse): The transmission pulse length becomes longer, and sensitivity improved.   

Small targets are zoomed and are easy to observe. When the sea state is bad, detection 
performance decreases. Recommended conditions are following. 

 

                 

・

Detection of small targets in good weather conditions, at long range.

 

 

5.12.2    IR (INTERFERENCE REJECTION)

 

 
You can eliminate the interference from other radars by setting an appropriate IR level. However, if a higher 
IR level is selected, the detection of small targets such as buoys and small boats become difficult. In general 
“Low” level should be selected. 

 

 

 

 

Содержание JMA-1030 Series







































































































































































































Отзывы:

Нет отзывов