JRC JLN-650, Инструкция по эксплуатации, Страница: 176 / 190

12-6
Standard Menu
（１１）
ALARM AND GRAPH SETTING
･ C.SPD ALARM ･ L OFF kn :SELECT WITH / KEY
･ S.SPD ALARM ･ L OFF kn :SELECT WITH / KEY
･ BOTTOM DEPTH ALARM ･ S OFF 60 m :SET WITH KEY
･ TIMER ALARM OFF 1:00 1:30 2:00 2:30 h
･ TRIP ALARM OFF 1:00 2:00 3:00 4:00 NM
･ TRIP/TIMER RESET CANCEL OPERATE
･ TEMP ALARM ･ H OFF 10 11 12 13 14 15 16 17 ℃
･ TEMP GRAPH CENTER 15 ℃ :SET WITH KEY
･ TEMP GRAPH WIDTH OFF 1 2 4 8 ℃
･ WIND SPEED ALARM ･ L OFF m/s :SELECT WITH / KEY
･ MENU DISPLAY DISPLAY EXIT PREVIOUS
･ HELP ≫ PUSH ENT KEY
（１２）
“UNDO” SETTING
･ UNDO (RETURN TO FORMER MENU) CANCEL OPERATE
･ MENU DISPLAY DISPLAY EXIT PREVIOUS
･ HELP ≫ PUSH ENT KEY
（１３）
TIDAL CURRENT PICTURE SETTING
CURRENT GRAPH SETTING
･ C.SPEED RANGE AUTO 1 2 4 6 8 10 kn
･ CURRENT VECTORS DISP.ON/OFF ≫
･ SHIP SPEED VECTORS DISP ON OFF
･ GRAPH SIZE NORMAL LARGE
･ WIND DIRECTION MARK DISP ON OFF
ECHO GRAPH SETTING
･ ECHO GRAPH DEPTH RANGE 100 200 300 500 m
･ ECHO GRAPH MODE ECHO SN
･ SN. LEVEL HIGH 0 dB :SET WITH KEY
･ SN. LEVEL LOW -12 dB :SET WITH KEY
･ COLOR A B C D
･ BACK COLOR STND BLK D.BLU GRY WHT
･ MENU DISPLAY DISPLAY EXIT PREVIOUS
･ HELP ≫ PUSH ENT KEY
（１４）
CURRENT VECTORS DISPLAY ON / OFF
･ ABSOLUTE CURRENT VECTOR A DISP ON OFF
･ ABSOLUTE CURRENT VECTOR B DISP ON OFF
･ ABSOLUTE CURRENT VECTOR C DISP ON OFF
･ ABSOLUTE CURRENT VECTOR D DISP ON OFF
･ ABSOLUTE CURRENT VECTOR E DISP ON OFF
･ RELATIVE CURRENT VECTOR A DISP ON OFF
･ RELATIVE CURRENT VECTOR B DISP ON OFF
･ RELATIVE CURRENT VECTOR C DISP ON OFF
･ RELATIVE CURRENT VECTOR D DISP ON OFF
･ RELATIVE CURRENT VECTOR E DISP ON OFF
･ MENU DISPLAY DISPLAY EXIT PREVIOUS
･ HELP ≫ PUSH ENT KEY
（１５）
CURRENT DEPTH SETTING :SETTING WITH A NUMERICAL KEY
･ A LAYER 12 m TOP LOCK
･ B LAYER 20 m
･ C LAYER 30 m
･ D LAYER 50 m
･ E LAYER 100 m BOTTOM LOCK
･ MENU DISPLAY DISPLAY EXIT PREVIOUS
･ HELP ≫ PUSH ENT KEY
UNDO
Refer to 3.2.3 “Basic Operation of Menu”.
MENU / PICTURE SETTING / TIDAL CURRENT
≫
Refer to 4.2 “Current Display Setting”.
MENU / PICTURE SETTING / TIDAL CURRENT
≫
CURRENT VECTORS DISPLAY ON/OFF
≫
Refer to 4.2.1 “Current Circle Graph Setting”.
CURRENT DEPTH SETTING
Refer to 4.2.3
“
Current Measurement Layer Depth
Setting
”
.
▲ ▼
▲ ▼
▲ ▼
MENU / MEASURE SETTING
≫
ALARM AND GRAPH
SETTING
≫
Refer to 4.1.8 “Alarm and Graph Setting”.