JRC JCY-1850 -, Инструкция по эксплуатации

Страница: 31 / 73

1. Operation
17
1.5.3.2 How to operate the Data Processor Unit
1. To stop the recording of data into the Protective Capsule Unit
ATTENTION
Do not halt the recording of data onto the
Protective Capsule Unit
while
the ship is navigating. Otherwise no data would be recorded, even in
case of an accident.
1) Press the
REC STOP SWITCH
on the
Main Control Board
.
2) The
REC LED
on the
Main Control Board
blinks.
3) After about a minute, the blinking
REC LED
on the
Main Control Board
and
RECORDING LED
on the
Operation Panel Unit
are turned off and the recording of
the data into the
Protective Capsule Unit
stops.
4) When the
Recording Control Unit
stops recording to the
Protective Capsule Unit
,
the Recording Alarm is generated. (Error code: 22__)
2. To restart the recording of data into the Protective Capsule Unit
1) Press the
REC START SWITCH
on the
Main Control Board
.
2) The
REC LED
on the
Main Control Board
lights up.
3) The
RECORDING LED
on the
Operation Panel Unit
lights, and the recording of the
data into the
Protective capsule Unit
starts.
4) When the
Recording Control Unit
restarts recording to the
Protective Capsule Unit
,
the Recording alarm stops.
3. To back up the data stored in the CF CARD
ATTENTION
Do not remove the
CF CARD
while the
CARD LED
on the
Main Control
Board
is on. It could damage the
CF CARD
. Make sure that
CARD LED
is
off.
1) Make sure that the
CARD LED
on the
Main Control Board
is on.
2) Press the
CARD STOP SWITCH
on the
Main Control Board
.
3) The
CARD LED
on the
Main Control Board
blinks for about 5 seconds.
4) Make sure that the
CARD LED
on the
Main Control Board
is turned off. And press
the
CF CARD EJECT BUTTON
.
5) Take out the
CF CARD.
Insert the
CF CARD
with a
CARD ADAPTER
into the
PC
that has a
PCMCIA
slot and copy the data into the
PC
.
6) After the copy has been finished, insert the
CF CARD
into the
CARD
slot on the
Main Control Board
. (Be sure that the
CF CARD JRC-label
side is pointing right.)
7) Make sure that the
CARD LED
lights up.
8) Then the recording of data into the
CF CARD
starts automatically.