JRC JCY-1850 -, Инструкция по эксплуатации

Страница: 20 / 73

1. Operation
6
1.3.2 Stopping the System
y
To stop the equipment, follow the procedures described below.
ATTENTION
To operate the
Recording Control Unit
, the
front door
has to be unlocked and
opened.
ATTENTION
Do not turn off the breaker of the power distribution board while the
system is active. Otherwise, the system is battery-operated by
the Power
Supply Unit
.
ATTENTION
Before turning off the
Recording Control Unit
, be sure to stop recording data
to the
CF CARD
by pressing the
CARD STOP SWITCH
on
the Main Control
Board
. Otherwise, data may not be recorded to the
CF CARD
.
1. Stopping the Recording Control Unit
1) Unlock the front door with the key and open it.
2) Be sure to stop recording data to the
CF CARD
by pressing the
CARD STOP SWITCH
on
the
Main Control Board
.
y
Make sure that the
CARD LED
on the
Main Control Board
is off.
y
Be aware that if the
Power Supply
is turned off while the
CARD LED
is on, data may
not be recorded to the
CF CARD
.
3) Turn off the
Power SWITCH
of the
POWER Supply Unit
.
4) Then all the
LED
s are turned off.
2. Stopping the Operation Panel Unit
If the
Power Supply Unit
in the
Recording Control Unit
is turned off, the
Operation Panel
Unit
is also turned off.
3. Stopping the Protective Capsule Unit
If the
Power Supply Unit
in the
Recording Control Unit
is turned off, the
Protective
Capsule Unit
is also turned off.
4. Stopping the Microphone Unit
If the
Power Supply Unit
in the
Recording Control Unit
is turned off, the
Microphone Unit
is also turned off.
5. Stopping the Option Units
If the
Power Supply Unit
in the
Recording Control Unit
is turned off, the
Option Units
are
also turned off.