JRC Alphatron Marine AlphaPhone 100 AS, Инструкция по установке и эксплуатации, Страница: 13 / 19

3.3 Operation at the off-hook state
3.3.1 Checking incoming and outgoing calls
Use the UP or DOWN key to view the information of the incoming calls including phone number, date and time. Press
REDIAL/ key to check outgoing call record with call duration.
3.3.2 Dialing for display mode
During the number shown on LCD such as incoming call, outgoing call and phone book memory, press SPEAKER /
key or pick up handset to dialing out the number.
3.3.3 Dialing Two-touch memory
Pick up the handset or press SPEAKER key and press M.. key and N (N=1 ~ 9, 0, * or #).
3.3.4 Call Time
The display shows the duration of a call in progress since a number has been dialed out. Manual control is not available.
3.3.5 Pause key
Press PAUSE key to insert a delay time of 3.6 seconds in a dialing sequence.
3.3.6 Mute key
When during phone conversation, you do not want the person on the line to hear your voice, press MUTE key to cut off
the microphone, MUTE ON will be prompted.
To resume conversation, press MUTE key again, MUTE OFF will be prompted.
3.3.7 FLASH key
During off-hook state, press FLASH key for recall that is used for some PSTN network and PBX services.
3.3.8 REDIAL key
When the phone is off-hook, press REDIAL/ key to dial out the phone number which was dialed out by user at the
latest time.
3.3.9 In use / New call LED
The status of the phone is shown by the In use LED (21).
• The LED is turned on during the phone is off-hook.
• The LED will be blinking while there is a miss call.
• The LED will be turned off after viewing all missed calls in incoming call log.
13 | Telephone Operation