JRC Alphatron Marine AlphaPhone 100 AS, Инструкция по установке и эксплуатации, Страница: 12 / 19

3.2.8 C key
The use of the C key is different in the modes of the phone.
1. In the setting mode:
• Correct any input mistakes
• Quit the setting
2. In the pre-dialing mode:
• Correct any input mistakes
3.2.9 Delete key
The Delete / key can be used in different circumstances. Use the key accordingly:
•
When scrolling outgoing calls, use key to delete a phone number.
•
When scrolling incoming calls, use key to delete a phone number.
Note Press and hold key for 4 seconds to delete all incoming call records.
•
When scrolling phone book, press key to delete a phone book record.
Note Press and hold key for 4 seconds to delete all phone book records.
3.2.10 Phone number store
There are more possibilities to store a phone number in the AlphaPhone 100 AS. To store a phone number, perform one
of the following actions:
1. One-touch memory
• On-hook + pre-dialing OK + Mx (x = 1 ~ 4)
• On-hook + incoming call + OK + Mx (x = 1 ~ 4)
• Dial out:
• Off-hook + Mx (x = 1 ~ 4)
• Press Mx (x = 1 ~ 4) first and then off-hook
2. Two-touch memory
• On-hook + pre-dialing OK + N (N =1 ~ 9, 0, *, # )
• On-hook + incoming call + OK + N ( N = 1 ~ 9, 0, *, # )
• Dial out: on-hook + M.. + N ( N = 1 ~ 9, 0, *, # )
3. Phone Book memory
• Incoming call + OK + PHONE BOOK + edit of phone book + OK
3.2.11 Ringer volume control
Ringer volume can be adjusted to 3 different levels of OFF / L / H by the slide switch (29) at the bottom.
3.2.12 Ring Indicator (Ringer LED)
The ring indicator will be blinking when there is an incoming call.
12 | Telephone Operation