Model Select
Model Name
S3
Model select allows up to 30 different models to be stored
and selected.
Note
: When setting up a new model it is
recommended that an unused model memory is
selected. If a current model memory is selected it’s
recommended that the model be reset to factory
default setting before programming the new model.
See model reset page S4.
1. In the
SYSTEM Menu
, highlight and select
Model
SEL
using the
Selector
.
2. Use the
Selector
to highlight and select the desired
model number to be used.
3. Return to the SYSTEM Menu by pressing the
LIST
button.
The model name screen allows each model to be given
an eight digit name or number. This is convenient for
identifying a model or the channel number the model
is on. The model’s name will appear in the upper right
corner of the main info screen.
1. In the
SYSTEM Menu
, highlight and select
MDL
Name
using the
Selector
.
2. The cursor (indicates where the next character will be
placed) is positioned at the beginning of the model
name. Press the
Selector
to obtain a list of available
characters.
3. Highlight and select the desired character to form the
model name. After the character is selected, rotate
the
Selector
to position the cursor where the next
character is to be placed and press the
Selector
to
obtain the character list again. Repeat until the model
name is completed.
4. Return to the SYSTEM Menu by pressing the
LIST
button.
Select�
�
�
29 HELI�
SPCM
�
�
�
30 HELI�
SPCM
MODEL 1�
MODEL 1 GLID�
SPCM
�
�
�
2 ACRO�
SPCM
�
�
�
3 GLID�
SPCM
[Model SEL]
�
MODEL 1�
GLID <ZENITH 56> SPCM
[MDL Name]
